Reliable technology – for everyday challenges

The robust Logscom GTP consists of two components:

• The marking beam is mounted on the log-facing side of the forwarder guard. It contains the printhead with sixteen nozzles that spray ink line by line onto the log end during printing.

• The control unit is attached directly to the swing arms of the forwarder crane. It houses the ink tank, hydraulic control, and electronics. It is wirelessly connected to the control interface in the cab.

Using a hydraulic cylinder, the printer swings from its protected resting position into the marking position and precisely applies the marking to the end of the log.

Optional: Log holder for added stability

For thinner wood or assortments with uniform diameters, the optional stabilization device ensures secure support during marking. Especially for light or hard-to-grasp logs, the log holder improves positioning and prevents wobbling. It can also be retrofitted to existing GTP systems.

For larger roundwood with a diameter of approx. 30 cm or more, the weight of the log itself is often sufficient for secure guidance.

Customize every marking individually

With the Logscom TimberPrinter software, you control the printing process directly from the onboard computer – safely, conveniently, and easily

Decide for yourself what should be marked: text, font size, marking length, and print intensity can all be adjusted flexibly. Tailored to the wood, weather conditions, and specific application.

Whether it’s thin or thick timber, covered in frost or freshly cut – there’s a suitable setting for every task.

Felling, marking, documenting – with every cut.

The Harvester Timber Printer from Logscom provides a valuable tool for your harvester. The printer is integrated directly into the felling head, parallel to the saw bar. This enables immediate marking of each log right after the cut – fully automatic, traceable, without time loss or additional work steps.

Fully integrated and digitally controlled

The HTP connects to the harvester’s hydraulic system and is operated entirely from the cabin.
Printing parameters – such as size, text, and marking position – are entered directly by the operator using the Logscom TimberPrinter software. The printing process is conveniently triggered via foot pedal.

Linking harvester data with the log

Markings can be connected to the harvester’s production report based on the StanForD standard.
This enables each marked log section to be assigned directly to an owner, stand, or tree ID.
Digital linking reduces the effort required for traceability and improves tracking throughout the entire supply chain – from forest to processing.
A professional solution to enhance transparency in certified supply chains.

Locate logs.
Select timber precisely.
Control volume.

MetricBoost™ is the smart software solution for pinpointing logs, easily verifying measurement data, and eliminating time-consuming pile measurements. The application processes harvester data and presents it in a clear, structured way. These digital records can be linked directly to physical markings on the logs, enabling accurate tracking, precise positioning, and efficient timber logistics.

Easily meet legal requirements

The software helps you comply with traceability and origin requirements – such as those set by the EU Regulation on deforestation-free products (EUDR).